Using the Leveluk Super 501

Step 1. Check the machine against the contents list printed in your box before anything else.

Step 2. Read the operation manual supplied with your unit. It is the only document that describes this machine's own panel and start-up sequence.

Step 3. Decide where it will live. The Leveluk Super 501 measures 352 × 384 × 250 mm and weighs 10.1 kg, so it wants a level worktop near the tap and a power outlet.

Step 4. If you would rather not set it up alone, an authorized Enagic representative can do it with you.

Step 1. Set the diverter on your tap so water is sent through the machine rather than straight to the sink.

Step 2. Choose the water you want on the control panel.

Step 3. Open the faucet and draw the water. The Super 501 uses a twin flexible hose system, so where a setting makes two waters at once, each one leaves by its own hose.

Step 4. Close the faucet when you have finished, and let the automatic cleaning finish before you draw again.

Step 1. The Leveluk Super 501 is a countertop machine that connects to the kitchen tap.

Step 2. Fit the diverter to the tap as the manual describes, so water can be sent either through the machine or straight to the sink.

Step 3. Plug the unit into a standard outlet — it draws 200 W.

Step 4. Check that it sits level and that nothing is pulling on its connections.

Step 1. Strong Kangen Water, pH 11.0 (Not for drinking). A strong alkaline water for cleaning and food-preparation tasks around the home — not intended for drinking.

Step 2. Kangen Water, pH 8.5 – 9.5 (For drinking). Mildly alkaline water for everyday drinking and cooking — the heart of the Enagic hydration routine.

Step 3. Clean Water, pH 7.0 (For drinking). Filtered, pH-neutral water for moments when you want a clean, neutral glass.

Step 4. Beauty Water, pH 4.0 – 6.0 (Not for drinking). A mildly acidic water often used as a toner in beauty routines — for external use, not for drinking.

Step 5. Strong Acidic Water, pH 2.7 (Not for drinking). A strongly acidic water for cleaning and household hygiene tasks — not intended for drinking.

Step 1. Let the automatic cleaning finish before you draw water again.

Step 2. Do not drink water discharged during a cleaning cycle.

Step 3. Wipe the outside with a soft, dry cloth.

Step 1. Watch for the filter reminder — the Leveluk Super 501 has smart filter technology that keeps count for you.

Step 2. Fit a genuine Enagic cartridge for this model.

Step 3. Follow the replacement procedure in the operation manual supplied with your unit.

Step 1. Write down exactly what happens: what is on the display, what the flow is like, and which setting you were on.

Step 2. Check the simple things first — the diverter position, the tap fully open, and whether a filter reminder is showing.

Step 3. Look the symptom up in the operation manual supplied with your unit.

Step 4. If it is not there, contact an authorized Enagic representative or Enagic Philippines service rather than opening the machine.